Gabion 300mm L x 300mm W x 300mm H, 75x75mm, AL-TEN
Gabion is Australian manufactured quality.
After assembly gabion cage is 300mm Length x 300mm Width x 300mm Height (measured from centre of wire) x 4mm diameter. Select Spiral, Nikolock or U-Clip connectors. Alternatively C-Ring type connectors are available, please contact us.
Kitset includes Panels: 6 of 300mm x 300mm, 12 of .3m spirals. Stiffeners: 2 of #3. AL-TEN is wire coated with a minimum of 290 grams of 10% Aluminium and 90% Zinc.
If spirals kitset contains: Spirals 12 of .3m.
If using Nikolock space a minimum of every 3 apertures. If using U-Clips or C rings space a minimum of every 2 apertures.
Gabion kitset is supplied unassembled in a pack or pallet depending upon quantity.
Always consider the stability of the wall you're constructing and whether internal reinforcing may be required. If the gabion is used for retaining you may need to ensure there is proper anchoring into the slope to prevent collapse, for example geogrids and earth anchors are often used. Check with an engineer for advice as soil type and other factors must be considered.