Gabion 300mm x 300mm x 750mm H, 75x75mm, AL-TEN

Previous
Gabion 300mm x 300mm x 525mm H, 75x75mm, AL-TEN
Gabion 300mm x 300mm x 525mm H, 75x75mm, AL-TEN
Next
Gabion 300mm x 300mm x 975mm H, 75x75mm, AL-TEN
Gabion 300mm x 300mm x 975mm H, 75x75mm, AL-TEN
Full stock
$49.69
$55.21
Save 10%
GABKITSET2069S

After assembly gabion cage is 300mm Length x 300mm Width x 750mm Height (measured from centre of wire) x 4mm diameter. Select Spiral or Nikolock connectors. Alternatively C-Ring type connectors are available, please contact us.

Connection Types

AL-TEN

Choose Connector
Quantity
In Stock

Kitset includes Panels: 4 of 750mm x 300mm, 2 of 300mm x 300mm. Stiffeners: 4 of 300mm (cross braces). AL-TEN is wire coated with a minimum of 290 grams of 10% Aluminium and 90% Zinc.

If spirals kitset contains: Spirals 8 of .3m, 4 of .75mm.

If using Nikolock space a minimum of every 3 apertures. If using C rings space a minimum of every 2 apertures.

Gabion kitset is supplied unassembled in a box or pallet depending upon quantity.

Important:

A gabion cage of these dimensions is not stable and will easily topple unless reinforced internally.

For this reason you must use internal reinforcing set into or bolted to a concrete footing. Reinforcing steel may be used (capped to prevent water from entering if hollow section). Typically the reinforcing should be placed every metre and extend approximately 3/4 of the height into the cage.

The depth of the footing and reinforcing steel dimensions must be determined based upon soil type and height of wall. Check with your builder, concrete supplier or engineer for advice.

See attachment for an example of how to do this.

GABKITSET2069S

Data sheet

Material Type
AL-TEN (Galfan Plus)
Pitch
75mm x 75mm (square)
Length
300mm
Width
300mm
Height
750mm
Connection Type
Spirals, U-Clips or C Rings
Gabion Type
Gabion Cage (kitsets)
m3
0.068
Weight with rock (approx)
122 kg

Reviews Reviews (0)

Based on 0 reviews - 0 1 2 3 4 0/5
Full stock