Gabion 1950mm x 300mm x 1500mm H, 75x75mm, AL-TEN

Previous
Gabion 1950mm x 300mm x 975mm H, 75x75mm, AL-TEN
Gabion 1950mm x 300mm x 975mm H, 75x75mm, AL-TEN
Next
Gabion 1950mm x 525mm x 525mm H, 75x75mm, AL-TEN
Gabion 1950mm x 525mm x 525mm H, 75x75mm, AL-TEN
Full stock
$230.73
GABKITSET2092S

After assembly gabion cage is 1950mm Length x 300mm Width x 1500mm Height (measured from centre of wire) x 4mm diameter. Select Spiral or Nikolock connectors. Alternatively C-Ring type connectors are available, please contact us.

Connection Types

AL-TEN

Choose Connector
Quantity
In Stock
*

Kitset includes panels: 2 of 1950mm x 1500mm, 2 of 1950mm x 300mm, 3 of 1500mm x 300mm. Stiffeners: 16 of 310mm (front to back), plus 2 of 980mm (placed end to end from centre panel). AL-TEN is wire coated with a minimum of 290 grams of 10% Aluminium and 90% Zinc.

If spirals kitset contains: Spirals 8 of 1m, 12 of .75m, 6 of .3m

If using Nikolock space a minimum of every 3 apertures. If using C rings space a minimum of every 2 apertures. 

Gabion kitset is supplied unassembled in a box or pallet depending upon quantity. 

Important:

Always consider the stability of the wall you're constructing and whether internal reinforcing may be required. If the gabion is used for retaining you may need to ensure there is proper anchoring into the slope to prevent collapse, for example geogrids and earth anchors are often used. Check with an engineer for advice as soil type and other factors must be considered.

For free standing walls you may wish to reinforce the wall to a concrete foundation. See attachment for an example of how to do this.

ALTEN
GABKITSET2092S

Data sheet

Material Type
AL-TEN (Galfan Plus)
Pitch
75mm x 75mm (square)
Length
1950mm
Width
300mm
Height
1500mm
Connection Type
Spirals, U-Clips or C Rings
Gabion Type
Gabion Cage (kitsets)
m3
0.9
Weight with rock (approx)
1530 kg

Reviews Reviews (1)

Based on 1 review - 0 1 2 3 4 3,00/5
0 1 2 3 4
(3/5

Solid product, prompt shipping but kit was missing items

I would recommend this product as it is well made and looks good. I would also recommend purchasing the clips and gun instead of using the spirals as it would be much neater and quicker. My kit was also missing a large number of support stays, my kit was for a 10 meter wall and only 40 stays come in the kit, at least 3 times that amount is required if following the installation instructions. I had to purchase more to complete my wall, i was dissapointed that these weren\\\'t supplied free of charge. Other than that, a great product.


Shop owner reply (05/03/2024):
Hi, We have, following your advice, increased the stiffener numbers for all the 1.5m high cages. We apologise for this as they should have been sent to you at no extra charge.
Total Rating Total Rating:

3.0
3,00/5 - 1 review

  Add Review View Reviews View Reviews
Full stock