Meihotech M-500
  • Meihotech M-500
  • Meihotech M-500

C Ringer Tool

$3,699.00

Meihotech M-500 Gabion C-Ringer. This Meihotech fastening tool is made in Japan. It is light weight at 6.5kg.

Quantity
In Stock

Previous
Hog Rings Meihotech C Rings Gabion (Galfan)- Strip of 50
Hog Rings Meihotech C Rings Gabion (Galfan)- Strip of 50
Next
C Ringer for Gabions (rental)
C Ringer for Gabions (rental)

Meihotech M500 hog ring tool, made in Japan. One of the best quality brands in the market, and this is one of the most reliable gabion tools available.

This tool is for gabion work and uses heavy duty 3mm x 45mm C rings. 

Air consumption (we get asked this a lot) is 9.89 litres per shot (approximately). Therefore based on the C Ringer continuously firing 32 shots per minute, the tool would consume approximately 316 litres of air per minute or 11 CFM. However, this figure would likely be half this in actual use. Air Pressure (MPa): 0.6 - 0.7 (87 - 101 psi).

The C rings required are 3mm diameter and will close to an inside diameter of approximately 12mm or if trigger released before it closes a second time the ID will be 18mm.

Check out our listing for C rings available.

Manufacturer offers one year factory warranty, we also offers parts and maintenance.

14MGARINGTOOLM

Data sheet

Primary Applications
gabion
Weight
6.5 kg
Unit of Measure
box
Gabion Type
Gabion Accessory
Product
c ringer (pneumatic). C ring closes to 12mm ID

Download

16 other products in the same category: