0 $0.00

Menu

Back
Gabion
- - stainless steel 316L
    316L stainless steel.
  - Stainless Steel 4 mm (75 x 75)
    Kitsets (75 x 75 pitch)
    
    Panels (75 x 75 pitch)
  - gabion tools and accessories
    Tools (gabion C ringers) and accessories
  - PVC coated gabion
    PVC coated woven mesh
  - PVC coated gabion
    PVC coated weld mesh
- - Technical
    Gabion Product Information
    
    Gabion Tools
    
    Gabion-Construction-Guides
- - Gabion
Fabrics
- - Nonwoven geotextiles
    For drainage, separation, stabilization. Used under roads, behind gabions, and for lining drains to separate aggregate from soil.
  - Woven geotextiles
    Roading fabrics made from woven polypropylene. Suitable as a separation barrier between earth and aggregate. Rural roads, paved roads, unpaved roads. Not recommended for drainage applications.
  - Fabric Accessories
    Weed matting pins (ground staples), bentonite clay, clips
- - Weed Matting
    Premium weed matting for growers, nurseries and domestic applications. (Technical info: Weed Matting)
  - Frost Fabric
    A white, non-toxic frost protection fabric available in polyester 20 gsm and polyester 35 gsm. Allows ventilation and helps reduce frost damage to crops.
  - Erosion Matting
    Biodegradable erosion matting in natural jute.
- - Technical
    Fabrics Technical
  - fabrics
Other Products
- - Bentonite
    Root inhibitor, bentonite powder is often used at the base of root barrier.
  - Root Barrier
    1mm Re-cycled HDPE root barrier, Australian manufactured.
  - VersiDrain Geo
    A dimpled plastic sheet that provides effective drainage and waterproof membrane protection on foundation walls and other underground structures.
  - Versicell Drainage Cell
    A sub-soil modular drainage module for paved areas, roof gardens, planter boxes, etc.
- - TurfPave Grass Paver
    A modular plastic (re-cycled HDPE) grass paver. Stabilizers grass or gravel to allow vehicular traffic including trucks.
  - Hog Rings and Tools
    Fastening c rings and tools by Meihotech for various industries, including fishing industry, birdnetting, shade, poultry farming, car seats. For Meihotech gabion fasteners and tools see Gabion Tools category.
  - Accessories
    Weed mat pins, shade clips, steel stakes, fencing wire.
- - Dam Liner
    Permaflex Flexible polyethylene.
  - geomembrane tapes
    Tapes to join liner and root barrier. UV stabilized.
  - Technical
    General Technical
    
    Geomembrane Technical
  - root barrier
A-Z
Gallery
Contact Us
Trade/ Wholesale
Technical Pages

AL-TEN 4mm

Gabion kitsets and panels in 4mm AL-TEN (Aluminium 10% Zinc 90%) coated wire. Permathene AL-TEN weld mesh is manufactured in Australia. The metal is mild steel coated with a minimum of 290 grams of 10% Aluminium and 90% Zinc (exceeding gabion standard ASTM 974-97).

Standard mesh aperture (opening) sizes 75mm x 75mm and 100mm x 50mm.

AL-TEN

Show Less

Subcategories

Kitsets 4mm (75 x 75 pitch)

Gabions with aperture 75mm x 75mm (square pitch) x 4mm (thickness of wire). Permathene AL-TEN weld mesh is manufactured in Australia. The metal is mild steel coated with a minimum of 290 grams of 10% Aluminium and 90% Zinc (exceeding gabion standard ASTM 974-97).

Gabion Cages listed by Length x Width x Height and are supplied as kitsets (flat packed) and include stiffener wires and either spirals or U clips. Cage and panel sizes are measured at wire centres.

AL-TEN

Kitsets 4mm (100 x 50 pitch)

Gabions made with 100mm x 50mm (rectangular pitch) x 4mm (thickness of wire). Permathene AL-TEN weld mesh is manufactured in Australia. The metal is mild steel coated with a minimum of 290 grams of 10% Aluminium and 90% Zinc (exceeding gabion standard ASTM 974-97).

Gabion Cages listed by Length x Width x Height and are supplied as kitsets (flat packed) and include stiffener wires and either spirals or U clips. Cage and panel sizes are measured at wire centres.

AL-TEN

Panels 4mm (75 x 75 pitch)

Gabion panels made from 75mm x 75mm (square pitch) in 4mm diameter AL-TEN. Permathene AL-TEN weld mesh is manufactured in Australia. The metal is mild steel coated with a minimum of 290 grams of 10% Aluminium and 90% Zinc (exceeding gabion standard ASTM 974-97). Panel sizes are measured at wire centres.

AL-TEN

Panels 4mm (100 x 50 pitch)

Gabion panels made from 100mm x 50mm (rectangular pitch) x 4mm (thickness of wire). Permathene AL-TEN weld mesh is manufactured in Australia. The metal is mild steel coated with a minimum of 290 grams of 10% Aluminium and 90% Zinc (exceeding gabion standard ASTM 974-97). Panel sizes are measured at wire centres.

AL-TEN

Sort by:

View

There are 117 products.

1mL x 1mW x 1mH (100mmx50mm + spirals) AL-TEN

Gabion 1000mm L x 1000mm W x 1000mm H, 100x50mm, AL-TEN

In Stock

After assembly gabion cage is 1000mm Length x 1000mm Width x 1000mm Height (measured end to end) x 4mm diameter. Select Spiral, Nikolock or U-Clip connectors. Alternatively C-Ring type connectors are available, please contact us.
Connection Types
AL-TEN

Full stock

$185.09

Random Posts

AL-TEN 4mm

Subcategories

Resources