$41.01 -10% $36.91
Geotextile (150gsm average) is a needle punched non woven geotextile made of staple fibres. Primary applications: drainage, separation.
After assembly gabion cage is 300mm Length x 300mm Width x 975mm Height (measured from centre of wire) x 4mm diameter. Select Spiral, Nikolock or U-Clip connectors. Alternatively C-Ring type connectors are available, please contact us
Kitset includes panels: 4 of 975mm x 300mm, 2 of 300mm x 300mm. Stiffeners: 4 of 300mm (cross braces). AL-TEN is wire coated with a minimum of 290 grams of 10% Aluminium and 90% Zinc.
If spirals kitset contains: Spirals 8 of .3m, 4 of 1m.
If using Nikolock space a minimum of every 3 apertures. If using U-Clips or C rings space a minimum of every 2 apertures.
Gabion kitset is supplied unassembled in a box or pallet depending upon quantity.
A gabion cage of these dimensions is not stable and will easily topple unless reinforced internally.
For this reason you must use internal reinforcing (capped to prevent water) set into or bolted to a concrete footing. Reinforcing steel may be used (capped to prevent water from entering if hollow section). Typically the reinforcing should be placed every metre and extend approximately 3/4 of the height into the cage.
The depth of the footing and reinforcing steel dimensions must be determined based upon soil type and height of wall. Check with your builder, concrete supplier or engineer for advice.
See attachment for an example of how to do this.